The MiniTest 70B is a pocket sized, versatile and accurate thickness gauge with built-in sensor. It is a lightweight and handy coating thickness gauge in a pencil format with a built-in sensor.
Especially designed for easy operation, this gauge is the ideal tool to measure any non-magnetic coatings on steel and/or any insulating layers on non-ferrous metals. The spring-mounted sensors are equipped with wear-resistant sensor poles and ensure durability even when used for measurements on rough and abrasive substrates.
Designed for measurement on non-ferrous metals can measure insulating coatings such as paint, enamels, anodic films, etc, on non-ferrous metal bases such as aluminium, copper, brass, etc.
And for measurement on ferrous metals, non-magnetic coatings such as paint, enamels, chrome, etc., can be measured on ferro-magnetic bases such as constructional steel, car bodies, etc.
The MiniTest 70B Series provides accurate, non-destructive coating measurements on steel and non-ferrous metals. Also, the FN model is equipped with a dual sensor for automatic identification of the substrate. According to the substrate, it adjusts to the appropriate measuring principle: magnetic induction or eddy currents principle.
Measuring range 0 to 3 mm on steel substrates and 0 to 2.5 mm on non-ferrous metals.
- Pocket sized, compact coating thickness gauge
- For fast and precise measurements of non-magnetic coatings on steel and insulating coatings on non-ferrous metals
- Lightweight: only 80 grams
- Easy 2 button operation
- Built-in spring-mounted sensor
- Enables 1-point calibrations
- Automatic identification of the substrate material
- Built-in sensor
- MiniTest 70B
- Operating instructions
- Gauge tether
- Belt pouch
|Measuring Range||Ferrous Substrates: 0 - 3 mm (0-120 mils)|
Non-Ferrous Substrates: 0 - 2.5 mm (0-100 mils)
|Measuring Principle||Magnetic-induction / Eddy currents|
|Signal Processing||Sensor integrated 32-bit signal processing (SIDSP®)|
|Accuracy||± (2 µm + 3 % of reading) with 1-point calibration|
|Repeatability||± (2 µm + 1 % of reading)|
± (0.04 mils + 1% of reading)
|Low range resolution||10 µ|
|Minimum curvature radius convex||50 mm|
|Minimum curvature radius concave||40 mm|
|Minimum measuring area||⌀ 50 mm|
|Minimum substrate thickness||F: 0.7 mm|
N: 0.1 mm
|Measuring units||Metric/Imperial switchable|
|Calibration modes||1-point calibration|
|Operating temperature range||-10 to 60 °C (14 - 140 °F)|
|Storage temperature range||-20 to 70 °C (-4 - 158 °F)|
|Power supply||1xAA (Mignon)-battery|
|International standards||DIN EN ISO 1461, 2064, 2178, 2360, 2808, 3882, ASTM B 244, B 499, D7091, E 376|
|Dimensions||Approx. 157 mm length, ⌀ 27 mm|
|Weight incl. battery||Approx. 80 g (2.8 oz)|
MiniTest 70B-FN Coating Thickness Gauge, Combination Ferrous & Non-Ferrous Model; Range: F: 0 - 3 mm (0 - 120 mils) / N: 0 - 2.5mm (0 - 100 mils) - MIN/007017